White 510 Exhaust & Intake Pushrod

The Outer Barrel on this pushrod is made to fit loosely in the hole through the head casting. If it does not fit freely, the casting must be ground out. The Outer Barrel has been milled flat to help clear the oil out of the head-casting. The Lower Housing is stabilized by the hole through the casting. The Driver tube and the Outer Barrel should not touch each other.
Note: Care should be taken when aligning the rocker arm, to insure that the outside of the Driver tube and inside of the Outer Barrel do not rub against each other.

Parts included with this pushrod